If this isn’t enough, customer support is available 24/7. It also shows you how to use the CS-2 and take advantage of all the extra features. This walks you through the entire installation process. To make things easier, Auto-Vox includes an instructional video in the kit. Zip ties and clamps are included in the kit, which means you won’t need to worry about any dangling wires.įor some people this hard-wiring process might seem a bit advanced. One gets wired into your reverse light terminal, and the other gets wired to the frame as a ground. The wire itself is 5 feet long, and has two different cables. This way, it will turn on whenever you put the car in reverse, and turn off when you’re in drive or park. The camera is powered by the power supply that runs to your car’s reverse lights. As a result, you don’t have to worry about mounting a separate transmitter, saving you time. The video transmitter is built right into the camera itself. This means you’re putting a permanent hole in your bumper. If your license plate is mounted off to one side, you’ll need to screw the camera into your bumper. That said, this design does have a downside. It has a built-in frame with a screw slot, so you can get it mounted in a minute with just a screwdriver. The camera itself is designed to mount right on your license plate bracket. Do this overnight, and you’ll wake up to a dead battery. If you leave the monitor plugged in while your car is turned off, it will continue to drain power. If you currently depend on a 12-volt USB adapter for power, you won’t have to worry about losing that functionality. This makes it easy to use other devices, such as a phone charger. For instance, you can plug it into a back seat outlet, leaving your front outlet free for other purposes. However, it does give you a few extra options. This is more cord than you’ll need in almost any vehicle. The monitor plugs into your 12-volt power outlet, and comes complete with a 12-foot cord. The outer edge will simply be too curved for the suction cup to mount effectively. That said, on most vehicles, you’ll need to mount it on the center of your windshield. You don’t have to screw it in permanently or use any crazy adhesive strips that gum up your windshield. It attaches to either your windshield or your dashboard with a suction cup mount. The monitor itself measures 4.5 inches wide, 3.4 inches tall, and half an inch thick. You don’t have to worry about running a wire across the length of your car. There’s no actual wire connecting the two, which makes installation easier than most backup cameras. The Auto-Vox CS-2 (Use Code “R7UPSFXX” for 33% discount) is a two-part backup camera: a monitor and the camera itself. We’ll talk about the installation and wiring, how it’s used, the video quality, and the extras. This is a relatively barebones kit, but it comes with a few features that are well worth looking at. We’re about to review the Auto-Vox CS-2 Wireless Backup Camera Kit. Considering the fact that not everybody’s needs are the same, this is a good thing. You can also choose the exact camera you want. This way, you can get the vehicle model you want, and worry about the camera later. The obvious solution is simply to buy an aftermarket camera. This means you can potentially end up paying thousands of extra dollars just to get a built-in backup camera. In other words, you may have to pay for a bunch of other bells and whistles you don’t want. Similarly, depending on the manufacturer, the backup camera may only come in some vehicle packages. For instance, many vehicles give you the option of either a built-in GPS or a built-in backup camera. That said, it often comes with a trade-off. This is a great feature, since it saves you the trouble of buying and installing an aftermarket kit. Nowadays, many vehicles come with a built-in backup camera.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |